Density Analysis

Precise measurement of particle density is critical for many applications both during processing of raw materials and the finished product.

escubed are able to measure skeletal volume using an AccuPyc 1330, and bulk tapped density using a jolting volumeter.

Gas pycnometry

AccuPyc 1330

Gas pycnometry is a non-destructive method for calculating skeletal density by measuring the amount of helium displaced by a sample.

The weighed sample is placed in its chamber and once sealed, filled with helium which penetrates small voids and open pores. The pressure in the sample chamber is compared to a reference and the skeletal density is calculated and reported. Density is a key indicator of the skeletal structure of a material and therefore a highly important variable that often needs monitoring as it affects the function and performance of many different products.

escubed have experience working with a variety of sectors to measure samples from ranging from pharmaceuticals to grain to mining slurries.

escubed have the capability to measure the skeletal density of powders, solids, slurries and non-volatile liquids in volumes ranging from 1cm3 to 100cm3.

Bulk Density



Bulk density, also known as tapped density, is a non-destructive method for analysing the volume of a sample at its maximum packed volume.

escubed are able to quantify flowability by reporting the Hausner ratio and Carr’s index. A Hausner ratio of <1.25 indicates a powder that is free flowing whereas >1.25 indicates poor flowability. Similarly, the smaller the Carr’s Index the better the flow properties.

Bulk density is measured by pouring the sample into a graduated cylinder and tapping it a set number of times using a jolting volumeter. Using the mass of the sample, tapped and untapped volume, escubed can calculate:

 
  • Pour (or bulk) density
  •  
  • Tapped density
  •  
  • Hausner ratio
  •  
  • Carr’s index
  • newsletter signup

    Get notified of new services, community news and special offers.Subscribe by email today.